Community Login
username:
password:

GM HCCI engine

Last post 09-11-2007 10:45 AM by Go Fast. 2 replies.
Page 1 of 1 (3 items)
Sort Posts: Previous Next
  • 08-30-2007 4:07 PM

    GM HCCI engine

    What do you guys think about the new HCCI engine from GM? It's supposed to by more fuel efficient by igniting a mixture of fuel and air and compressing it in the cylinder. Unlike a spark-ignition gas engine or diesel engine, HCCI produces a low-temperature, flameless energy release throughout the combustion chamber. All of the fuel in the chamber is burned simultaneously. This produces power similar to today’s conventional gas engines but uses less fuel. Heat is a necessary enabler for the HCCI process, according to GM. A traditional spark ignition is used when the engine is started cold to generate heat within the cylinders and quickly heat up the exhaust catalyst and enable the HCCI system. GM says HCCI provides up to a 15 percent fuel savings and meets current emissions standards, but didn’t say when it would appear in any of its vehicles.
    Brendan Baker
    Senior Editor
    Engine Builder Magazine
    www.enginebuildermag.com
  • 09-11-2007 10:11 AM In reply to

    Re: GM HCCI engine

     

    The technology reminds me a lot of the Honda CVCC or stratified charge technology Smokey Yunick was working on in the 1980s. I would like to know what is the compession ratio?

     

     

  • 09-11-2007 10:45 AM In reply to

    Re: GM HCCI engine

    It uses a lower compression ratio than a diesel but imagine it's higher than spark ignition. A stratisfied charge design is very similar. The CVCC was more or less for emissions but led Honda to more radical designs like VTEC. Here's a good article on the HCCI technology: http://www.autobloggreen.com/2007/08/26/abg-tech-analysis-and-driving-impression-gms-hcci-engine/
Page 1 of 1 (3 items)